The turquoise on the bottom had some pieces that needed to be replaced.
This is an old window and this glass with the circles is very hard to find since it isn't made any longer. There were 3 similar panels that all had broken glass which had to replaced.
The green glass had to be replaced and that hard to find clear glass with a pattern of circles in the right hand corner had to be replaced.
A new frame of yellow glass was added to the outside to give it more color.
This long light needed a few new glass pieces along the bottom replaced.
This is a round frame that had pulled away from the glass because lead was used instead of zinc as the outside frame. The hooks that were put on were not in the right place so it was not reinforced like it should have been.
DEVA
This was an old window with some hard to find glass that needed to be replaced. It was put together using lead came.
This lamp had fallen and had broken glass and the panels were broken apart. I found the exact 3 colors of glass that needed to be replaced and soldered it all back together. The vase cap also had to be re-attached.
This very old window had to be put back together with new lead came. I found the exact color and style of the glass that was needed to replace the old broken pieces.
More broken pieces that had to be replaced.
Many of these repairs needed to have hooks replaced or added to them at the top. Some of their frames were broken or bent and had to be replaced. Cracked and broken pieces needed to be replaced. Some of the older windows needed to be taken out of their wood frames and the outside zinc needed to be replaced. If the pieces are older their glass is sometimes hard to find. Over time the lead came stretches and that makes the glass pieces rattle. Some just need to be reputtied.
This panel had a crack in the green glass and it was replaced with the exact color and pattern. It was also taken out of this old heavy window frame and reframed with zinc which made it easier to hang because it was lighter in weight.